Geovale Services Pvt. Ltd. was engaged by client for 3D geological modelling and Resource estimation using SURPAC software for the Limestone block of Vijayawada District, Andhra Pradesh, India.
Scope of work
As per the work order is as follows:
- Processing of the exploration data in Surpac software.
- Geological Database Preparation.
- Cross-Section digitization.
- Preparation of printable cross sections
- Valid 3D Solid Model formation
- Analysis of Geostatistical Parameter for all attributes
- Block Model preparation with all required attributes and constraints
- Grade Estimation and preparation of Grade-Tonnage curve
- Resource Statement as per UNFC.
Geological Resource assessment
- Geovale carried out 3D ore body modelling using the borehole data and evaluated the Geological resources available at the project area.
- A total number of 16 geological cross-sections has been prepared along NE-SW direction using Surpac software. As the boreholes were spaced at nearly 400m, the section lines were also spaced 400m in mineralization for better interpretation of the ore body.
- Three lithological domains were delineated in the prospect. These are: (A) Massive Limestone, (B) Flaggy limestone and (C) Intercalation of Limestone and quartzite.
- Borehole sample statistical analysis: A good understanding of the statistical distribution of the data is a pre-requisite to grade estimation; hence the data was analysed with statistical and geo-statistical methods.
- Data used in grade estimation should have a common sample length to ensure equal weighting. In field it is not feasible to analyse all samples of equal length, but for geo-statistics analysis, samples were composited by down-hole compositing method in Surpac software.
- Validated geological cross-sections have been used for 3D solid modelling / wire framing considering continuity / discontinuity of solid models. Different triangulation methods were used to make these valid solid models.
- Cut-off grade of CaO considered as 34%. So, Outliers value have been removed by using Surpac software for resource estimation.
- Geological resource Model was created by taking lateral and transverse extents from solid models and kept in such a way that entire solid model will reside inside the block model. Attributes were assigned to the blocks for each of the properties to be modelled after generating the block model. Constraint was defined for every limestone lithology for each block. Estimation was done by using those constraints for ore for each deposit.
Conclusion:
Geovale adeptly executed a geological resource assessment using advanced modelling techniques. They utilized 3D ore body modelling with borehole data, supported by geological cross-sections prepared in Surpac software, to effectively evaluate geological resources. The team identified three lithological domains and applied statistical methods for precise grade estimation. Solid modelling techniques ensured the integrity of 3D models, and a specific cut-off grade was used to optimize resource estimation. The resulting geological resource model was detailed, incorporating constraints for each limestone lithology to ensure accurate resource estimation.
Geovale delivered a comprehensive and reliable geological assessment that enabled informed decision-making for the client.